7:30 AM - 6:00 PM MON - FRI After Hours Contact Lee Osborne
-
-
606 Wardell Ind. Park Rd. Cedar Bluff, VA 24609
Custom Steel Fabrications
Custom Steel Fabrications
Natural clay has existed within the earth for millennia. Early civilizations discovered that when clay was shaped and fired, it transformed into a stronger, glass-like material—marking the birth of ceramics as essential tools and cultural artifacts. Since 9000 BC, ceramics have played a critical role in human progress, evolving from basic implements and trade goods into advanced materials that support modern life.
Today, ceramic technology underpins complex systems we rely on daily—from electronics and computing to aviation, mining, housing, medical implants, and space exploration. At CeramicTech, we build on this legacy through advanced ceramic process equipment and custom steel fabrication, applying time-tested principles with modern engineering to solve today’s toughest industrial challenges.
Our Steel Fabrication Processes
We focus on fabricating and producing 92% alumina engineered liners for their exceptional balance of cost and performance. Alumina oxide is refined from mined borax, calcined, blended with additives like silica, then compressed and fired at 2,200°F to promote crystal growth. This process produces a hardness rating of 9.5 on the Mohs scale, delivering an inert, impact-absorbing material that resists buildup from sticky process materials, such as wet concrete.
-
Strict process controls ensure uniform density, hardness, and fit—delivering reliable ceramic liners that perform consistently in high-wear industrial environments.
-
Engineered for abrasion resistance and minimal material buildup, our liners extend service life while reducing cleaning, repairs, and unplanned shutdowns.
CTI-X7® Static Screens
The CTI-X7® Static Screen redefines screen feed point technology, countering the radius sieve bend and drop-box standard of the last 50 years.
The X-7® Static Screen is a magnetite recovery screen that classifies fine material to the material circuits, including magnetite at a minus 1.5 MM.
Screening through the minus 1.5 MM screens improves the drain and rinse performance on final spray washing and enhances screening on flat cyclone circuit screens. Many coal operations using CTI X-7® mag recovery screens report magnetite loss at less than .5 lbs. per raw ton.
CTI IMPACT ELBOWS
CTI-X7® Protection Screens
These screens are scaled-down and operate much as the X-7® Static Screens. The 6-7 mm static screens are interchangeable. Maintenance cost is kept to a minimum considering the protection screen's small footprint, allowing your operators to visualize oversize concentrations feed to the circuit.
The CTI X-7® Circuit Protection Screen has been a consistent performer in sizing out oversize particles in delicate coal circuits, such as the feed to the classifier, microcells, and thickener underflow protection.
Problems associated with the misplaced material can adversely affect your plant performance, leading to lost coal/minerals and forced emergency plant shutdowns.
CTI is a class-A certified mineral equipment contract manufacturer. The CTI-X7® Brand is respected throughout the mining industry and is known as the best performer to support improved operational performance
We warranty all our X-7® mineral processing and maintenance equipment and equipment parts.
Included in all our units for easy installation is a flowchart, and we are always available for questions that you may have. CTI appreciates your business and looks forward to servicing you and your company in all your equipment needs
